𓁟 host1.bitchan.one

+⧖Last Thread: Halloween costume edition >Your print failed? Go to: www.simplify3d.com/support/print-quality-troubleshooting >Calibrate your printer. ellis3dp.com/Print-Tuning-Guide/ teachingtechyt.github.io/calibration.html If that doesn't help you solve your problems, post: >A picture of the failed part >Printer make & model >Filament type/brand >Slicer & slicer settings >What printer should I buy? Do your own research, but if you gotta ask; just buy whatever Bambu fits your budget. DIY: reprap.org/wiki/ SLA: >>>/tg/3dpg >Where can I get things to print? thingiverse.com/ thangs.com/ printables.com/ grabcad.com/ yeggi.com/ cults3d.com/ stlfinder.com/ google.com/ T*legr*m >What CAD software should I use? Free to anyone: FreeCAD, Fusion360, Onshape, TinkerCAD, Free to me: Autodesk Inventor, AutoCAD, Solidworks, Rhino, Solid Edge, ZBrush Autistic /g/ooners: OpenSCAD, OpenJSCAD, CadQuery, Microstation Participation medal entries: PTC Creo, Solvespace Mesh free-forming and modeling: Blender Architects: Sketchup, IngeTrazo >What slicer should I use? For everyone: Cura, PrusaSlicer, BambuStudio for Bambu owners. For enthusiasts: SuperSlicer, OrcaSlicer For autists: Pleccer/SuperPleccer, Kiri:Moto, FullControl, IceSL https://pastebin.com/AKqpcyN5 Last Thread: Halloween costume edition >Your print failed? Go to: www.simplify3d.com/support/print-quality-troubleshooting >Calibrate your printer. ellis3dp.com/Print-Tuning-Guide/ teachingtechyt.github.io/calibration.html If that doesn't help you solve your problems, post: >A picture of the failed part >Printer make & model >Filament type/brand >Slicer & slicer settings >What printer should I buy? Do your own research, but if you gotta ask; just buy whatever Bambu fits your budget. DIY: reprap.org/wiki/ SLA: >>>/tg/3dpg >Where can I get things to print? thingiverse.com/ thangs.com/ printables.com/ grabcad.com/ yeggi.com/ cults3d.com/ stlfinder.com/ google.com/ T*legr*m >What CAD software should I use? Free to anyone: FreeCAD, Fusion360, Onshape, TinkerCAD, Free to me: Autodesk Inventor, AutoCAD, Solidworks, Rhino, Solid Edge, ZBrush Autistic /g/ooners: OpenSCAD, OpenJSCAD, CadQuery, Microstation Participation medal entries: PTC Creo, Solvespace Mesh free-forming and modeling: Blender Architects: Sketchup, IngeTrazo >What slicer should I use? For everyone: Cura, PrusaSlicer, BambuStudio for Bambu owners. For enthusiasts: SuperSlicer, OrcaSlicer For autists: Pleccer/SuperPleccer, Kiri:Moto, FullControl, IceSL https://pastebin.com/AKqpcyN5
𓀐 @MW8GPP_g: i need some sort of filament dryer. i originally was going to get a food dehydrator because it felt like a "better" purchase, maybe i could use it for actually drying food or something (even though i've never needed a food dehydrator in my entire life). but then you can't print out of a dehydrator and you'd need some other bullshit to hold the spool while printing. is it worth just getting a purpose built filament dryer like pic related? i'd rather not have some nigger-rigged setup. i've been putting off using nylon and TPU because it's such a motherfucker to try and oven-dry it every time i want to use it.

>i'd rather not have some nigger-rigged setup If you want a ready to use purpose-built solution, then the kind you posted which heat the filament is the only option, they all use the same technology. The only real alternatives are either desiccant (you have to manually refill/refresh), or solid-state moisture-removal, which is expensive and I haven't seen one integrated into the device, you still have to manually design an enclosure for those.

⧖expiring ~7d0/1 kept1w ago

𓀐 @cs+Rv82W

⏱ 1w 👍 0

⬆ upvote 0